| Brick/Stall
Size Salt Holders |
|
|
| Product
/ Contact |
Price |
Our
Comments |
| Dan’s
Saddlery Salt Block Holder SBH-100
www.dans-saddlery.com
- 800-683-3267 - |
$8.49 |
Heavy-duty
black or “natural” plastic, solid back
and sides but designed so that when block is snapped
in place it protrudes somewhat from the front of
the holder. Comes with instructions and hardware
for mounting in a bucket, but not hardware for wall
mounting. Disadvantage is that it’s a little
hard to get the blocks to “snap” into
place. You have to really wrestle with them a bit,
but one they are in there, they’re in to stay.
A good buy. Durable. Won’t rust. Places the
salt so that the horse won’t be able to chew
on the plastic. We suggest you purchase stainless
steel hardware to use rather than the provided mounting
hardware to avoid rusting. |
Easy
Up Ultimate Salt Block Holder #02373
Schneiders, 800-365-1311
www.sstack.com |
$5.95 |
Rough-finish,
heavyweight wire brick holder. No mounting brackets/holes
or screws.It is made of zinc-coated steel. |
Jack’s
Salt Block Holder
10546-WH
Jack’s Manufacturing
740-335-5121, www.jacksmfg.com |
$3.95-$7.95 |
Plastic- or chrome-coated heavy weight metal in
cage design. Has predrilled mounting holes for screws
and plastic-coated screws provided. One of the more
durable coated-wire salt-brick holders, and not
as easy for horses to twist and bend out of shape
as others. |
Jeffers
Salt Block Holder CQ-S0
www.jeffersequine.com
800-533-3377 |
$4.50 |
Vinyl coated 1/4" metal in cage design. Available
in red, blue or green. No mounting brackets or holes.
Economical, but we found the plastic coating easily
cracks and is easily chewed, which will lead to
rapid corrosion. |
Ringer
Salt Block Holder
Model SQB and SSB
320-983-3626
www.ringerproducts.com |
$8.08-$8.99 |
Yellow zinc-coated steel. Flat metal plate with
metal rods in shape of a V. Holes for four screws,
but screws aren’t provided. The yellow zinc
coating makes it appear to be copper or bronze colored.
Moderate corrosion resistance from the coating.
You can choose Model SQB for square-ended bricks
or Model SSB for standard rectangular stall-size
salt blocks. |
Salt
Block Feeder Double L #114
800-553-4102
www.doublel.com |
$4.45 |
Rigid, durable, heavy-duty, UV-stabilized polypropylene.
Temperature-resistant. Tray design with mounting
holes in back (no hardware included) and slots in
the bottom to allow drainage. May be stall mounted
or used outside. Will accept assorted sizes of small
salt bricks. Brick sits in the tray and is not secured
to the holder, making it easy for a horse to get
the brick out and onto the ground. |
Stainless
Steel Salt Block Holder
The Stainless Steel Salt BlockHolder
Company, Inc,
800-431-3444
www.durhamhill.com |
$19.95 |
Unpainted stainless steel, solid sides, open front
and back except for securing rims, three screw mounting
(stainless steel screws included). Good price for
a holder that may last a lifetime. |
Valley
Vet Salt Block Holder
#25723, 800-356-1005
www.valleyvet.com |
$11.25 |
Heavy-duty plastic, three-sided with open top and
front, two predrilled nail or screw holes in back
(screws not supplied). Guaranteed three years. Durable
and well priced. Won’t rust or corrode. |
| Large,
Field-Size (50 lb) Salt Block Holders |
|
|
Double
Salt Block Holder HQ-D1
Jeffers Equine
www.jeffersequine.com
800-533-3377 |
$23.95 |
Ground holder for one or two 50-lb. salt blocks,
allowing you to offer plain and
mineralized salt blocks at the same time. However,
it’s stable with just one block in it as well.
33" x 18" x 9", sturdy black plastic.
Blocks sit in a “V” shaped trough with
a drainage hole in the bottom. |
Ringer
Big Salt Block Holder
Model BSB for 25- to 50-lb. blocks
320-983-3626
www.ringerproducts.com |
$21.95 |
Yellow zinc-coated ground holder with rods securing
side of block. Drainage hole in bottom so rain water
does not accumulate. Zinc coating provides moderate
corrosion resistance. |
Valley
Vet Salt Block Holder
50 lb. #12482
Valley Vet Supply
www.valleyvet.com
800-356-1005 |
$15.25 |
Hanging holder for 50-lb. blocks. Fits over pipes/poles
or other fencing. Baked black enamel coating over
metal. Good idea for keeping large blocks up off
the ground, but the enamel finish chips, which leads
to rapid corrosion. The fence-mounted holder is
a nifty idea for keeping blocks clean from dirt/mud
or manure, but it definitely requires a sturdy fence
line to support it. |
